Intersoft Community - WebGrid Enterprise - Freeze Column Error

Freeze Column Error

Hans — Wed, 03 Oct 2012 04:07:56 GMT

Hello,

So you have tried to run my sample on your end but the result is the issue still persists?

I attached a video about the result of my sample, on my end. Please kindly have review on my video and let me know if there are steps that I missed.
However, if can’t get the video. Please try to download the video from this link .

For your information, I use ISNet.WebUI.WebGrid.dll version 8.0.7200.201 and ISNet.WebUI.Resources.dll version 3.0.5000.850.
And if there is an update / hotfix for this issue, the hotfix will only available in WebGrid 8 not WebGrid 7.

I am really sorry for not telling this earlier.
However my work around should resolve this issue.

Thank you for your understanding.

Regards,
Hans.

Freeze Column Error

adajani@najiasystems.com — Tue, 02 Oct 2012 13:33:27 GMT

Still haven't resolved this error...

Freeze Column Error

Hans — Mon, 17 Sep 2012 21:51:52 GMT

Hello,

I’m sorry. I re-attach the sample.
However, if still can’t get sample. Please try to download the sample from this link

Regards,
Hans.

Freeze Column Error

adajani@najiasystems.com — Mon, 17 Sep 2012 11:13:08 GMT

Still unable to open. See attached imaged.

Freeze Column Error

Hans — Mon, 17 Sep 2012 00:02:25 GMT

Hello,

Here the sample.

Regards,
Hans.

Freeze Column Error

adajani@najiasystems.com — Fri, 14 Sep 2012 12:30:05 GMT

Hans,

I was not able to unzip your sample. It seems some of the files were corrupt. Can you please resend.

Freeze Column Error

Hans — Fri, 14 Sep 2012 03:31:24 GMT

Hello,

Thank you for your reply.

Please correct me, if I wrong.
So you have tried my sample and it works fine (resolve your problem)?
And when you try to apply the work around to your project, the problem still persists?

If yes, perhaps there is configuration in your project, that make the problem still persists.

Would you mind to provide me the simple sample that replicates your issue?
Or could you help me to modify my sample? So I can help you to investigate your problem.

I have been following up your issue to the development team. I’ll let you know if there are any updates for your problem.

Thank you for your understanding and patience

Regards,
Hans.

Freeze Column Error

adajani@najiasystems.com — Thu, 13 Sep 2012 18:02:20 GMT

Hans,

I made the change as suggested but the problem still persists. The columns are misaligned. See attached image. I determined the cause of this was due to adding the first empty column. I need that column due to requirements.

I still give the user the option to hide columns. So this bug will still occur. That's a problem for us. I tried removing the extra first column I was adding and doing some more updates on the grid. Over all it seemed to work fine, but then the misalignment came up again. See the other attached image.

I can continiously recreate this problem on my end. I don't need a work around anymore. I just need this bug fixed. Can you please inform when it is possible to receive a hotfix so I can inform my customer?

Freeze Column Error

Hans — Tue, 11 Sep 2012 23:41:33 GMT

Hello,

Thank you for the sample.

I am able to reproduce your issue on my end as well.

I have one solution that you might try.

I removed “ID” column and “Name” column from WebGrid’s PrepareDataBinding.
Then I use HiddenDataMember property in “Gender” column and “Address” column.
In “Gender” column, I set HiddenDataMember to “ID”.
In “Address” column, I set HiddenDataMember to “Gender”.

By doing this, I still can get the value from “ID” column and “Name” column.
And to get the value, I use this javascript:

WebGrid1.GetSelectedObject().GetRowObject().GetCells().GetNamedItem("Gender").GetElement().attributes["ID"].value;WebGrid1.GetSelectedObject().GetRowObject().GetCells().GetNamedItem("Address").GetElement().attributes["Name"].value;

This solution will resolve the “Update Wrong Column” issue and “Misaligned” issue as well.

Please have review on my sample to see how it works.

Thank you.

Regards,

Hans.

Freeze Column Error

adajani@najiasystems.com — Tue, 11 Sep 2012 11:22:15 GMT

Hans,

Thanks for the sample, but I could not download it. It seemed the cs file and movie were corrupt. They wouldn't unzip.

I've tried to modify one of our old samples. My findings are as follows:

- When attempting to edit a cell, WebGrid, updates the wrong column. Please see attached images. In my sample, the columns are completely misaligned which I still wasn't able to reproduce. However, in the attached sample, the wrong column is updated. Definitely an issue (Please note I use the "structure" parameter in the query string to create the column manually).

- In my project (similar setup), I noticed when the grid posts back to the server after an update that the columns are not returned in the same order when I step through with the debugger. For example:
Grid is initialized as such col0, col1, col2, col3, col4, col5, col6 with the first two columns hidden.
After a postback, the column structure is returned as col2, col3, col4, col5, col0, col1, col6.
I don't understand why that happens, but I bet it is a reason for why my columns get misaligned.

Thank you Hans. Please keep me posted on these fixes as it is important to our project and we are past our deadline. An update date on your part would be really helpful so I may inform my client.

Freeze Column Error

adajani@najiasystems.com — Sun, 26 Aug 2012 17:41:01 GMT

Hi,

I saw this error on here before but it doesn't seem it was addressed. I am using WebGrid 7.0.7200.

My scenario:

- I am binding my webgrid to an ObjectDataSource.
- I am creating my columns dynamically in the PrepareDataBinding event. There are 80+ columns. For our scenario, let's assume the following:

visibleCol_Frozen, visibleCol_Frozon, visibleCol, visibleCol, HiddenCol, HiddenCol, visibleCol...etc.

What happens is if I scroll past where the hidden columns would be, the display screws up as you see in the attached images.

I tried the following with these two doc types:

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

and

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" >

The latter doctype screws up my entire display in IE so it is no longer an option.

I also tried my html tag with and without xmlns="http://www.w3.org/1999/xhtml"

I really need this issue fixed please! My delivery date is nearing quickly!